TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel.
Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 220 VAC 50/60 Hz coil.
Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
| Specifications | |
| Main | |
| Range | TeSys |
| Range of Product | TeSys Deca |
| Product or Component Type | Contactor |
| Device short name | LC1D |
| contactor application | Motor control |
| Resistive load | |
| Utilisation category | AC-4 |
| AC-3 | |
| AC-1 | |
| AC-2 | |
| AC-3e | |
| poles description | 3P |
| [Ue] rated operational voltage | Power circuit <= 690 V AC 25…400 Hz |
| [Ie] rated operational current | 50 A (at <140 °F (60 °C)) at <= 440 V AC AC-3 for power circuit |
| 80 A (at <140 °F (60 °C)) at <= 440 V AC AC-1 for power circuit | |
| 50 A (at <140 °F (60 °C)) at <= 440 V AC AC-3e for power circuit | |
| [Uc] control circuit voltage | 220 V AC 50/60 Hz |
| Complementary | |
| Motor power kW | 22 kW at 380…400 V AC 50 Hz (AC-3) |
| 25 kW at 415 V AC 50 Hz (AC-3) | |
| 30 kW at 440 V AC 50 Hz (AC-3) | |
| 30 kW at 500 V AC 50 Hz (AC-3) | |
| 33 kW at 660…690 V AC 50 Hz (AC-3) | |
| 15 kW at 220…230 V AC 50 Hz (AC-3) | |
| 11 kW at 400 V AC 50 Hz (AC-4) | |
| 30 kW at 1000 V AC 50 Hz (AC-3) | |
| 22 kW at 380…400 V AC 50 Hz (AC-3e) | |
| 25 kW at 415 V AC 50 Hz (AC-3e) | |
| 30 kW at 440 V AC 50 Hz (AC-3e) | |
| 30 kW at 500 V AC 50 Hz (AC-3e) | |
| 33 kW at 660…690 V AC 50 Hz (AC-3e) | |
| 15 kW at 220…230 V AC 50 Hz (AC-3e) | |
| 30 kW at 1000 V AC 50 Hz (AC-3e) | |
| Maximum Horse Power Rating | 3 hp at 115 V AC 60 Hz for 1 phase motors |
| 7.5 hp at 230/240 V AC 60 Hz for 1 phase motors | |
| 15 hp at 200/208 V AC 60 Hz for 3 phase motors | |
| 15 hp at 230/240 V AC 60 Hz for 3 phase motors | |
| 40 hp at 460/480 V AC 60 Hz for 3 phase motors | |
| 40 hp at 575/600 V AC 60 Hz for 3 phase motors | |
| Compatibility code | LC1D |
| Pole contact composition | 3 NO |
| Protective cover | With |
| [Ith] conventional free air thermal current | 10 A (at 140 °F (60 °C)) for control circuit |
| 80 A (at 140 °F (60 °C)) for power circuit | |
| Irms rated making capacity | 900 A at 440 V for power circuit conforming to IEC 60947 |
| 140 A AC for control circuit conforming to IEC 60947-5-1 | |
| Rated breaking capacity | 900 A at 440 V for power circuit conforming to IEC 60947 |
| Associated fuse rating | 10 A gG for control circuit conforming to IEC 60947-5-1 |
| 100 A gG at <= 690 V coordination type 1 for power circuit | |
| 100 A gG at <= 690 V coordination type 2 for power circuit | |
| Power dissipation per pole | 3.7 W AC-3 |
| 9.6 W AC-1 | |
| 3.7 W AC-3e | |
| [Ui] rated insulation voltage | Control circuit 600 V CSA |
| Control circuit 600 V UL | |
| Power circuit 600 V CSA | |
| Power circuit 600 V UL | |
| Control circuit 690 V IEC 60947-1 | |
| Power circuit 690 V IEC 60947-1 | |
| Overvoltage category | III |
| [Uimp] rated impulse withstand voltage | 8 kV IEC 60947 |
| Safety reliability level | B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 |
| B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 | |
| Mechanical durability | 6000000 cycles |
| Control circuit type | AC 50/60 Hz |
| Coil technology | Without built-in bidirectional peak limiting diode suppressor |
| Control circuit voltage limits | 0.3…0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz |
| 0.8…1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz | |
| 0.85…1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz | |
| 1…1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz | |
| Inrush power in VA | 140 VA cos phi 0.75 (at 68 °F (20 °C)) |
| 160 VA cos phi 0.75 (at 68 °F (20 °C)) | |
| Hold-in power consumption in VA | 13 VA 60 Hz cos phi 0.3 (at 68 °F (20 °C)) |
| 15 VA 50 Hz cos phi 0.3 (at 68 °F (20 °C)) | |
| Heat dissipation | 4…5 W at 50/60 Hz for control circuit |
| Operating time | 4…19 ms opening |
| 12…26 ms closing | |
| Maximum operating rate | 3600 cyc/h 140 °F (60 °C) |
| Connections – terminals | Control circuit: screw clamp terminals 1 0.00…0.01 in² (1…4 mm²) – cable stiffness: rigid |
| Control circuit: screw clamp terminals 2 0.00…0.01 in² (1…4 mm²) – cable stiffness: rigid | |
| Control circuit: screw clamp terminals 1 0.00…0.01 in² (1…4 mm²) – cable stiffness: flexible without cable end | |
| Control circuit: screw clamp terminals 2 0.00…0.01 in² (1…4 mm²) – cable stiffness: flexible without cable end | |
| Control circuit: screw clamp terminals 1 0.00…0.00 in² (1…2.5 mm²) – cable stiffness: flexible with cable end | |
| Control circuit: screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²) – cable stiffness: flexible with cable end | |
| Power circuit: screw terminals 1 0.00…0.04 in² (2.5…25 mm²) – cable stiffness: rigid | |
| Power circuit: screw terminals 2 0.00…0.02 in² (2.5…16 mm²) – cable stiffness: rigid | |
| Power circuit: screw terminals 1 0.00…0.04 in² (2.5…25 mm²) – cable stiffness: flexible without cable end | |
| Power circuit: screw terminals 2 0.00…0.02 in² (2.5…16 mm²) – cable stiffness: flexible without cable end | |
| Power circuit: screw terminals 1 0.00…0.04 in² (2.5…25 mm²) – cable stiffness: flexible with cable end | |
| Power circuit: screw terminals 2 0.00…0.02 in² (2.5…10 mm²) – cable stiffness: flexible with cable end | |
| Tightening torque | Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminal flat Ø 6 mm |
| Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminal Philips No 2 | |
| Power circuit 44.25 lbf.in (5 N.m) screw terminal flat Ø 6 to Ø 8 mm | |
| Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminal pozidriv No 2 | |
| auxiliary contact composition | 1 NO + 1 NC |
| Auxiliary contacts type | Mechanically linked 1 NO + 1 NC IEC 60947-5-1 |
| Mirror contact 1 NC IEC 60947-4-1 | |
| Terminals description ISO n°1 | (21-22)NC |
| (13-14)NO | |
| (A1-A2)CO | |
| Minimum switching voltage | 17 V for control circuit |
| Minimum switching current | 5 mA for control circuit |
| Insulation resistance | > 10 MOhm for control circuit |
| Non-overlap time | 1.5 ms on de-energisation between NC and NO contacts |
| 1.5 ms on energisation between NC and NO contacts | |
| Mounting Support | Rail |
| Plate | |
| Environment | |
| Standards | UL 508 |
| IEC 60947-5-1 | |
| EN 60947-4-1 | |
| IEC 60947-4-1 | |
| EN 60947-5-1 | |
| CSA C22.2 No 14 | |
| Product Certifications | UL |
| BV | |
| GL | |
| RINA | |
| CSA | |
| LROS (Lloyds register of shipping) | |
| GOST | |
| DNV | |
| CCC | |
| UKCA | |
| IP degree of protection | IP2X IEC 60529 |
| IP2X VDE 0106 | |
| Climatic withstand | IACS E10 exposure to damp heat |
| Operating altitude | 0…9842.52 ft (0…3000 m) |
| Fire resistance | 1562 °F (850 °C) IEC 60695-2-1 |
| Flame retardance | V1 conforming to UL 94 |
| Mechanical robustness | Shocks contactor opened 10 Gn for 11 ms) |
| Shocks contactor closed 15 Gn for 11 ms) | |
| Vibrations contactor opened 2 Gn, 5…300 Hz) | |
| Vibrations contactor closed 4 Gn, 5…300 Hz) | |
| Height | 5.00 in (127 mm) |
| Width | 2.95 in (75 mm) |
| Depth | 4.69 in (119 mm) |
| Net Weight | 3.09 lb(US) (1.4 kg) |
| Ordering and shipping details | |
| Category | US10I1222357 |
| Discount Schedule | 0I12 |
| GTIN | 3.38911E+12 |
| Returnability | Yes |
| Country of origin | US |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.70 in (9.4 cm) |
| Package 1 Width | 5.51 in (14.0 cm) |
| Package 1 Length | 5.20 in (13.2 cm) |
| Package 1 Weight | 3.19 lb(US) (1.446 kg) |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 5 |
| Package 2 Height | 5.91 in (15 cm) |
| Package 2 Width | 11.81 in (30 cm) |
| Package 2 Length | 15.75 in (40 cm) |
| Package 2 Weight | 16.54 lb(US) (7.502 kg) |
| Contractual warranty | |
| Warranty | 18 months |
Reviews
There are no reviews yet.