| Specifications | |
| Main | |
| Range | EasyLogic |
| Product name | EasyLogic PM11XXH RS |
| Device short name | PM1130H |
| Product or component type | Dual source energy meter |
| Complementary | |
| Power quality analysis | total harmonic distortion |
| Device application | Energy monitoring |
| Main or redundant power monitoring | |
| Type of measurement | Current |
| Voltage | |
| Frequency | |
| Power factor | |
| Phase angle | |
| RPM | |
| Peak demand power | |
| Harmonic distorsion (I THD & U THD) | |
| Active power | |
| Active energy | |
| Metering type | Unbalance current |
| Power factor and displacement PF (signed, four quadrant) | |
| Reactive power Q, Q1, Q2, Q3 | |
| Average current Iavg | |
| Active, reactive, apparent energy (signed, two quadrant) | |
| Active power P, P1, P2, P3 | |
| Frequency | |
| Calculated neutral current | |
| Voltage U21, U32, U13, V1, V2, V3 | |
| Unbalance voltage | |
| Rotation speed | |
| Demand power P, Q, S | |
| Phase currents | |
| Apparent power S, S1, S2, S3 | |
| Phase current I1, I2, I3 RMS | |
| Average voltage Vavg | |
| Counter functions | ON-load source 1 hour counting |
| ON hour counting | |
| ON-load source 2 hour counting | |
| Power interruption | |
| [Us] rated supply voltage | 48…277 V AC 45…65 Hz |
| 48…277 V DC | |
| Network frequency | 60 Hz |
| 50 Hz | |
| [In] rated current | 5:00 AM |
| 1:00 AM | |
| type of network | 2P |
| 2P + N | |
| 3P | |
| 1P + N | |
| 3P + N | |
| Maximum power consumption in VA | 4 VA at 240 V between phase and neutral |
| Maximum power consumption in W | 2 W at 240 V |
| Display type | 7 segments LED |
| Display colour | Red |
| Messages display capacity | 3 fields of 4 characters |
| Display digits | 12 digit(s) – 14.2 mm in height |
| Communication of data | Last cleared log |
| Reading of measurements | |
| All counters | |
| Revolution speed | |
| Instantaneous and demand values | |
| Tamperproof of settings | Protected by access code |
| Sampling rate | 32 samples/cycle |
| Measurement current | 5…6000 mA |
| Signal | Voltage (impedance 5 MOhm)4 x |
| Current 0.005…10 A (impedance 0.3 MOhm)6 x | |
| Measurement voltage | 35…480 V AC 50…60 Hz between phases |
| 35…277 V AC 50…60 Hz between phase and neutral | |
| 277…999000 V AC 50…60 Hz with external VT | |
| Frequency measurement range | 45…65 Hz |
| Measurement accuracy | Current +/- 0.5 % |
| Voltage +/- 0.5 % | |
| Frequency +/- 0.05 % | |
| Power factor +/- 0.01 | |
| Reactive power +/- 2 % | |
| Reactive energy +/- 2 % | |
| Active power +/- 0.5 % | |
| Apparent power +/- 0.5 % | |
| Active energy +/- 0.5 % | |
| Apparent energy +/- 0.5 % | |
| Harmonic distorsion (I THD & U THD) +/- 5 % | |
| Accuracy class | Class 2 reactive energy conforming to IEC 62053-23 |
| Class 0.5 active energy conforming to IEC 62053-22 | |
| Number of outputs | 1 relay |
| Output voltage | 300 V AC@2 A |
| Demand intervals | 1 s |
| Local signalling | Green LED: activity |
| Red LED: output signal 1…9999000 pulse/ k_h (kWh, kVAh, kVARh) | |
| Red LED: alternate source | |
| Communication port protocol | Modbus at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none – 2 wires, insulation 2500 V |
| Communication port support | RS485 |
| Data recording | Energy consumption logs |
| Material | Polycarbonate |
| Flame retardance | V-0 conforming to UL 94 |
| mounting mode | Flush-mounted |
| Mounting support | Framework |
| Provided equipment | Installation guide |
| Installation category | III |
| Type of installation | Indoor installation |
| Measurement category | Category III 480 V |
| Electrical insulation class | Class II |
| Connections – terminals | Current circuit: screw clamp terminals (bottom) 2.08…3.31 mm² cable(s) |
| Voltage circuit: screw clamp terminals (top) 0.82��3.31 mm² cable(s) | |
| Control circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s) | |
| Communication: screw clamp terminals (bottom) 0.33…3.31 mm² cable(s) | |
| Secondary circuit: screw clamp terminals (bottom) 0.33…3.31 mm² cable(s) | |
| Relay output: screw clamp terminals (rear) 0.33…3.31 mm² cable(s) | |
| Tightening torque | Current circuit: 0.9…1 N.m Philips No 2 screwdriver |
| Voltage circuit: 0.9…1 N.m Philips No 2 screwdriver | |
| Control circuit: 0.9…1 N.m Philips No 2 screwdriver | |
| Communication: 0.5…0.6 N.m Philips no 1 screwdriver | |
| Secondary circuit: 0.5…0.6 N.m Philips no 1 screwdriver | |
| Relay output: 0.5…0.6 N.m Philips no 1 screwdriver | |
| Wire stripping length | Current circuit: 3.68 mm |
| Voltage circuit: 7 mm | |
| Control circuit: 7 mm | |
| Communication: 7 mm | |
| 7 mm | |
| Standards | IEC 61010-1:ed. 3 |
| UL 61010-1:ed. 3 | |
| Product certifications | CE conforming to IEC 61010-1 |
| CULus conforming to UL 61010-1 | |
| CULus conforming to CSA C22.2 No 61010-1 | |
| C-Tick | |
| Width | 96 mm |
| Depth | Outside : 13 mm |
| Panel : 52 mm | |
| Height | 96 mm |
| Net weight | 300 g |
| Environment | |
| Electromagnetic compatibility | Electrostatic discharge conforming to IEC 61000-4-2 |
| Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 | |
| Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 | |
| Surge immunity test conforming to IEC 61000-4-5 | |
| Conducted RF disturbances conforming to IEC 61000-4-6 | |
| Magnetic field at power frequency conforming to IEC 61000-4-8 | |
| Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 | |
| Emission tests conforming to FCC part 15 class A | |
| Emission tests conforming to FCC part 15 Subpart C | |
| Emission tests conforming to FCC part 15 Subpart E | |
| Overvoltage category | III |
| IP degree of protection | IP51 front: conforming to IEC 60529 |
| IP30 body: conforming to IEC 60529 | |
| Relative humidity | 5…95 % at 50 °C |
| Pollution degree | 2 |
| Ambient air temperature for operation | -10…60 °C |
| Ambient air temperature for storage | -20…70 °C |
| Operating altitude | <= 2000 m |
| Service life | 7 year(s) |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.04 cm |
| Package 1 Width | 9.6 cm |
| Package 1 Length | 9.6 cm |
| Package 1 Weight | 285 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 18 |
| Package 2 Height | 30 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 5130 g |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 144 |
| Package 3 Height | 105 cm |
| Package 3 Width | 60 cm |
| Package 3 Length | 80 cm |
| Package 3 Weight | 41.1 kg |
Sale!
EASYLOGIC PM1130H DUAL P&E RLY RS CL 0.5, Dual Source Energy Meters -Schneider Electric
Original price was: ৳ 20,000.00.৳ 16,000.00Current price is: ৳ 16,000.00.
& Delivery/Courier ChargeDocuments: Product datasheet, Instruction Sheet, CAD, Catalogue
Free Delivery on orders over ৳50,000!
- Cash on delivery
- 1-3 Days Standard Delivery Guaranteed
- No-Risk Money Back Guarantee!
- No Hassle Refunds
- Secure Payments
Only logged in customers who have purchased this product may leave a review.
Related products
-
DM6000 Amp & Volt Meter (Digital) with basic readings – no communication-Schneider Electric
Original price was: ৳ 9,600.00.৳ 7,680.00Current price is: ৳ 7,680.00. Add to cart -
power meter PowerLogic PM5330, modbus, up to 31st Harmonic, 256KB 2DI/2DO 35 alarms-Schneider Electric
Original price was: ৳ 44,500.00.৳ 35,600.00Current price is: ৳ 35,600.00. Add to cart -
Circuit breaker, Compact NSX630N, 630A, 4P, 50kA, MCCB (Adjustable type Trip Unit) MicroLogic 2.3 trip unit – Schneider Electric
Original price was: ৳ 112,000.00.৳ 89,600.00Current price is: ৳ 89,600.00. Add to cart -
Power meter PowerLogic PM5310, modbus, up to 31st Harmonic, 256KB 2DI/2DO 35 alarms-Schneider Electric
Original price was: ৳ 40,100.00.৳ 32,080.00Current price is: ৳ 32,080.00. Add to cart
Reviews
There are no reviews yet.