Specifications | |
Main | |
Range of Product | Altivar Process ATV600 |
Product or Component Type | Variable speed drive |
Product Specific Application | Process and utilities |
Device short name | ATV630 |
Variant | Standard version |
Product destination | Asynchronous motors |
Synchronous motors | |
EMC filter | Integrated 492.1 ft (150 m) IEC 61800-3 category C3 |
IP degree of protection | IP00IEC 61800-5-1 |
IP00IEC 60529 | |
IP21 with kit VW3A9704)IEC 61800-5-1 | |
IP21 with kit VW3A9704)IEC 60529 | |
[Us] rated supply voltage | 380…480 V |
Type of cooling | Forced convection |
Supply frequency | 50…60 Hz – 5…5 % |
[Us] rated supply voltage | 380…480 V – 15…10 % |
Motor power kW | 132 kW normal duty) |
110 kW heavy duty) | |
Maximum Horse Power Rating | 200 hp normal duty |
150 hp heavy duty | |
Line current | 237 A 380 V normal duty) |
213 A 480 V normal duty) | |
201 A 380 V heavy duty) | |
165 A 480 V heavy duty) | |
Prospective line Isc | 50 kA |
Apparent power | 161.4 kVA 480 V normal duty) |
121.8 kVA 480 V heavy duty) | |
Continuous output current | 250 A 2.5 kHz normal duty |
211 A 2.5 kHz heavy duty | |
Asynchronous motor control profile | Constant torque standard |
Optimized torque mode | |
Variable torque standard | |
Synchronous motor control profile | Permanent magnet motor |
Synchronous reluctance motor | |
Speed drive output frequency | 0.1…500 Hz |
Nominal switching frequency | 2.5 kHz |
Switching frequency | 2.5…8 kHz with derating factor |
2…8 kHz adjustable | |
Safety function | STO (safe torque off) SIL 3 |
Discrete input logic | 16 preset speeds |
Communication Port Protocol | Ethernet |
Modbus TCP | |
Modbus serial | |
Option card | Slot A communication module, Profibus DP V1 |
Slot A communication module, PROFINET | |
Slot A communication module, DeviceNet | |
Slot A communication module, Modbus TCP/EtherNet/IP | |
Slot A communication module, CANopen daisy chain RJ45 | |
Slot A communication module, CANopen SUB-D 9 | |
Slot A communication module, CANopen screw terminals | |
Slot A/slot B digital and analog I/O extension module | |
Slot A/slot B output relay extension module | |
Slot A communication module, Ethernet IP/Modbus TCP/MD-Link | |
communication module, BACnet MS/TP | |
communication module, Ethernet Powerlink | |
Complementary | |
Mounting Mode | Wall mount |
Maximum transient current | 275 A 60 s normal duty) |
316.5 A 60 s heavy duty) | |
Phase | 3 phase |
Discrete output number | 0 |
Discrete output type | Relay outputs R1A, R1B, R1C 250 V AC 3000 mA |
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA | |
Relay outputs R2A, R2C 250 V AC 5000 mA | |
Relay outputs R2A, R2C 30 V DC 5000 mA | |
Relay outputs R3A, R3C 250 V AC 5000 mA | |
Relay outputs R3A, R3C 30 V DC 5000 mA | |
Output voltage | <= power supply voltage |
Permissible temporary current boost | 1.1 x In 60 s normal duty) |
1.5 x In 60 s heavy duty) | |
Motor slip compensation | Adjustable |
Not available in permanent magnet motor law | |
Automatic whatever the load | |
Can be suppressed | |
Acceleration and deceleration ramps | Linear adjustable separately from 0.01…9999 s |
Physical interface | Ethernet |
2-wire RS 485 | |
Braking to standstill | By DC injection |
Protection type | Thermal protection motor |
Safe torque off motor | |
Motor phase break motor | |
Thermal protection drive | |
Safe torque off drive | |
Overheating drive | |
Overcurrent between output phases and earth drive | |
Overload of output voltage drive | |
Short-circuit protection drive | |
Motor phase break drive | |
Overvoltages on the DC bus drive | |
Line supply overvoltage drive | |
Line supply undervoltage drive | |
Line supply phase loss drive | |
Overspeed drive | |
Break on the control circuit drive | |
Transmission Rate | 10, 100 Mbits |
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps | |
Frequency resolution | Display unit 0.1 Hz |
Analog input 0.012/50 Hz | |
Transmission frame | RTU |
Electrical connection | Control removable screw terminals 0.5…1.5 mm² AWG 20…AWG 16 |
Line side screw terminal 2 x 70…3 x 120 mm² 2 x AWG 2/0…2 x 300 kcmil | |
Motor screw terminal 2 x 70…3 x 120 mm² 2 x AWG 2/0…2 x 300 kcmil | |
Connector type | RJ45 on the remote graphic terminal)Ethernet/Modbus TCP |
RJ45 on the remote graphic terminal)Modbus serial | |
Data format | 8 bits, configurable odd, even or no parity |
Type of polarization | No impedance |
Exchange mode | Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP |
Number of addresses | 1…247 Modbus serial |
Method of access | Slave Modbus TCP |
Supply | External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection |
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection | |
Internal supply for digital inputs and STO 24 V DC 21…27 V), <200 mA overload and short-circuit protection | |
Local signalling | for local diagnostic 3 LEDs |
for embedded communication status 3 LEDs (dual colour) | |
for communication module status 4 LEDs (dual colour) | |
for presence of voltage 1 LED (red) | |
Width | 12.6 in (320 mm) |
Height | 33.5 in (852 mm) |
Depth | 15.4 in (390 mm) |
Net Weight | 180.8 lb(US) (82 kg) |
Analogue input number | 3 |
Analogue input type | AI1, AI2, AI3 software-configurable voltage 0…10 V DC 31.5 kOhm 12 bits |
AI1, AI2, AI3 software-configurable current 0…20 mA 250 Ohm 12 bits | |
AI2 voltage analog input – 10…10 V DC 31.5 kOhm 12 bits | |
Discrete input number | 8 |
Discrete input type | DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) |
Input compatibility | DI1…DI6 discrete input level 1 PLC IEC 61131-2 |
DI5, DI6 discrete input level 1 PLC IEC 65A-68 | |
STOA, STOB discrete input level 1 PLC IEC 61131-2 | |
Discrete input logic | Positive logic (source) DI1…DI8), < 5 V, > 11 V |
Negative logic (sink) DI1…DI8), > 16 V, < 10 V | |
Analogue output number | 2 |
Analogue output type | Software-configurable voltage AQ1, AQ2 0…10 V DC 470 Ohm 10 bits |
Software-configurable current AQ1, AQ2 0…20 mA 10 bits | |
Software-configurable current DQ-, DQ+ 30 V DC | |
Software-configurable current DQ-, DQ+ 100 mA | |
Sampling duration | 2 ms +/- 0.5 ms DI1…DI4) – discrete input |
5 ms +/- 1 ms DI5, DI6) – discrete input | |
5 ms +/- 0.1 ms AI1, AI2, AI3) – analog input | |
10 ms +/- 1 ms AO1) – analog output | |
Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input |
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output | |
Linearity error | AI1, AI2, AI3 +/- 0.15 % of maximum value analog input |
AO1, AO2 +/- 0.2 % analog output | |
Relay output number | 3 |
Relay output type | Configurable relay logic R1 fault relay NO/NC 100000 cycles |
Configurable relay logic R2 sequence relay NO 100000 cycles | |
Configurable relay logic R3 sequence relay NO 100000 cycles | |
Refresh time | Relay output R1, R2, R3)5 ms +/- 0.5 ms) |
Minimum switching current | Relay output R1, R2, R3 5 mA 24 V DC |
Maximum switching current | Relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC |
Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC | |
Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC | |
Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC | |
Isolation | Between power and control terminals |
Maximum output frequency | 500 kHz |
Maximum Input Current per Phase | 237.0 A |
Variable speed drive application selection | Building – HVAC compressor centrifugal |
Food and beverage processing other application | |
Mining mineral and metal fan | |
Mining mineral and metal pump | |
Oil and gas fan | |
Water and waste water other application | |
Building – HVAC screw compressor | |
Food and beverage processing pump | |
Food and beverage processing fan | |
Food and beverage processing atomization | |
Oil and gas electro submersible pump (ESP) | |
Oil and gas water injection pump | |
Oil and gas jet fuel pump | |
Oil and gas compressor for refinery | |
Water and waste water centrifuge pump | |
Water and waste water positive displacement pump | |
Water and waste water electro submersible pump (ESP) | |
Water and waste water screw pump | |
Water and waste water lobe compressor | |
Water and waste water screw compressor | |
Water and waste water compressor centrifugal | |
Water and waste water fan | |
Water and waste water conveyor | |
Water and waste water mixer | |
Motor power range AC-3 | 110…220 kW 380…440 V 3 phase |
110…220 kW 480…500 V 3 phase | |
Quantity per Set | 1 |
enclosure mounting | Wall mounted |
Environment | |
Insulation resistance | > 1 MOhm 500 V DC for 1 minute to earth |
Noise level | 69.9 dB 86/188/EEC |
Power dissipation in W | Forced convection 2755 W 380 V 2.5 kHz |
Volume of cooling air | 158506.07 Gal/hr(US) (600 m3/h) |
Operating position | Vertical +/- 10 degree |
Maximum THDI | <48 % full load IEC 61000-3-12 |
Electromagnetic compatibility | Electrostatic discharge immunity test level 3 IEC 61000-4-2 |
Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 | |
Electrical fast transient/burst immunity test level 4 IEC 61000-4-4 | |
1.2/50 µs – 8/20 µs surge immunity test level 3 IEC 61000-4-5 | |
Conducted radio-frequency immunity test level 3 IEC 61000-4-6 | |
Pollution degree | 2 IEC 61800-5-1 |
Vibration resistance | 1.5 mm peak to peak 2…13 Hz)IEC 60068-2-6 |
1 gn 13…200 Hz)IEC 60068-2-6 | |
Shock resistance | 15 gn 11 ms IEC 60068-2-27 |
Relative humidity | 5…95 % without condensation IEC 60068-2-3 |
Ambient air temperature for operation | 5…122 °F (-15…50 °C) without derating) |
122…140 °F (50…60 °C) with derating factor) | |
Ambient Air Temperature for Storage | -40…158 °F (-40…70 °C) |
Operating altitude | <= 3280.84 ft (1000 m) without derating |
1000…4800 m with current derating 1 % per 100 m | |
Product Certifications | DNV-GL |
ATEX zone 2/22 | |
UL | |
CSA | |
TÜV | |
ATEX INERIS | |
marking | CE |
Standards | UL 508C |
IEC 61800-3 | |
IEC 61800-3 environment 1 category C2 | |
EN/IEC 61800-3 environment 2 category C3 | |
IEC 61800-5-1 | |
IEC 61000-3-12 | |
IEC 60721-3 | |
IEC 61508 | |
IEC 13849-1 | |
Overvoltage category | III |
Regulation loop | Adjustable PID regulator |
Noise level | 69.9 dB |
Pollution degree | 2 |
Ordering and shipping details | |
Category | US1CP4E22207 |
Discount Schedule | CP4E |
GTIN | 3.60648E+12 |
Returnability | Yes |
Country of origin | US |
Packing Units | |
Unit Type of Package 1 | PCE |
Number of Units in Package 1 | 1 |
Package 1 Height | 26.0 in (66 cm) |
Package 1 Width | 18.9 in (48 cm) |
Package 1 Length | 40.6 in (103 cm) |
Package 1 Weight | 201.7 lb(US) (91.5 kg) |
Sale!
Variable Speed Drive, Altivar Machine, ATV630, 130kW, 380 to 480V, IP00-Schneider Electric
Original price was: ৳ 1,047,530.00.৳ 838,024.00Current price is: ৳ 838,024.00.
& Delivery/Courier ChargeDocuments: Product datasheet, Instruction Sheet, CAD file, Catalogue
Free Delivery on orders over ৳50,000!
- Cash on delivery
- 1-3 Days Standard Delivery Guaranteed
- No-Risk Money Back Guarantee!
- No Hassle Refunds
- Secure Payments
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.