Sale!

Soft starter for asynchronous motor, ATS480, 320A, 208 to 690V, 75-250KW-Schneider Electric

Original price was: ৳ 489,500.00.Current price is: ৳ 342,650.00.

& Delivery/Courier Charge
Category:

Free Delivery on orders over ৳50,000!

  • Cash on delivery
  • 1-3 Days Standard Delivery Guaranteed
  • No-Risk Money Back Guarantee!
  • No Hassle Refunds
  • Secure Payments

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 230V to 415V AC and up to 320A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load.

If connected in the motor supply line it is suitable for motors with power rating up to 160kW (at 400V) for standards applications and 132kW (at 400V) for severe applications. If connected to the motor delta terminals it is suitable for motors with power rating up to 220kW (at 400V) for standards applications and 250kW (at 400V) for severe applications. It weighs 18.2kg and its dimensions are, 320mm wide, 380mm high, 265mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF.

The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.

Specifications
Main
Range of productAltistart 48
Product or component typeSoft starter
Product destinationAsynchronous motors
Product specific applicationHeavy duty industry and pumps
Device short nameATS48
Utilisation categoryAC-53A
Ue power supply voltage230…415 V – 15…10 %
power supply frequency50…60 Hz – 5…5 %
Motor power kW75 kW at 230 V connection in the motor supply line for severe applications
90 kW at 230 V connection in the motor supply line for standard applications
132 kW at 230 V connection to the motor delta terminals for severe applications
132 kW at 400 V connection in the motor supply line for severe applications
160 kW at 230 V connection to the motor delta terminals for standard applications
160 kW at 400 V connection in the motor supply line for standard applications
220 kW at 400 V connection to the motor delta terminals for severe applications
250 kW at 400 V connection to the motor delta terminals for standard applications
Complementary
Device connectionIn the motor supply line
To the motor delta terminals
Protection typePhase failure: line
Thermal protection: motor
Thermal protection: starter
StandardsEN/IEC 60947-4-2
product certificationsC-Tick
CCC
DNV
SEPRO
NOM 117
CSA
TCF
GOST
UL
markingCE
Discrete input number5
Discrete input typePTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
Discrete input logicPositive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
Minimum switching current10 mA at 6 V DC for relay outputs
Discrete output number2
Discrete output type(LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO
Analogue output typeCurrent output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
Communication port protocolModbus
Connector type1 RJ45
Communication data linkSerial
Physical interfaceRS485 multidrop
Transmission rate4800, 9600 or 19200 bps
Function availableExternal bypass (optional)
Operating positionVertical +/- 10 degree
Height380 mm
Width320 mm
Depth265 mm
Product weight18.2 kg
Environment
Electromagnetic compatibilityConducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
Relative humidity0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Ambient air temperature for operation40…60 °C (with current derating of 2 % per °C)
-10…40 °C (without derating)
Ambient air temperature for storage-25…70 °C
Operating altitude<= 1000 m without derating
> 1000…2000 m with current derating of 2.2 % per additional 100 m
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height42.500 cm
Package 1 Width46.000 cm
Package 1 Length51.000 cm
Package 1 Weight20.000 kg
Contractual warranty
Warranty18 months

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
soft starter for asynchronous motor, Altistart 48, 195A, 230..415V, 45..160kWSoft starter for asynchronous motor, ATS480, 320A, 208 to 690V, 75-250KW-Schneider Electric
Original price was: ৳ 489,500.00.Current price is: ৳ 342,650.00.
Scroll to Top