Specifications | |
Main | |
Range | EasyLogic |
Product name | EasyLogic PM11XXH RS |
Device short name | PM1130H |
Product or component type | Dual source energy meter |
Complementary | |
Power quality analysis | total harmonic distortion |
Device application | Energy monitoring |
Main or redundant power monitoring | |
Type of measurement | Current |
Voltage | |
Frequency | |
Power factor | |
Phase angle | |
RPM | |
Peak demand power | |
Harmonic distorsion (I THD & U THD) | |
Active power | |
Active energy | |
Metering type | Unbalance current |
Power factor and displacement PF (signed, four quadrant) | |
Reactive power Q, Q1, Q2, Q3 | |
Average current Iavg | |
Active, reactive, apparent energy (signed, two quadrant) | |
Active power P, P1, P2, P3 | |
Frequency | |
Calculated neutral current | |
Voltage U21, U32, U13, V1, V2, V3 | |
Unbalance voltage | |
Rotation speed | |
Demand power P, Q, S | |
Phase currents | |
Apparent power S, S1, S2, S3 | |
Phase current I1, I2, I3 RMS | |
Average voltage Vavg | |
Counter functions | ON-load source 1 hour counting |
ON hour counting | |
ON-load source 2 hour counting | |
Power interruption | |
[Us] rated supply voltage | 48…277 V AC 45…65 Hz |
48…277 V DC | |
Network frequency | 60 Hz |
50 Hz | |
[In] rated current | 5:00 AM |
1:00 AM | |
type of network | 2P |
2P + N | |
3P | |
1P + N | |
3P + N | |
Maximum power consumption in VA | 4 VA at 240 V between phase and neutral |
Maximum power consumption in W | 2 W at 240 V |
Display type | 7 segments LED |
Display colour | Red |
Messages display capacity | 3 fields of 4 characters |
Display digits | 12 digit(s) – 14.2 mm in height |
Communication of data | Last cleared log |
Reading of measurements | |
All counters | |
Revolution speed | |
Instantaneous and demand values | |
Tamperproof of settings | Protected by access code |
Sampling rate | 32 samples/cycle |
Measurement current | 5…6000 mA |
Signal | Voltage (impedance 5 MOhm)4 x |
Current 0.005…10 A (impedance 0.3 MOhm)6 x | |
Measurement voltage | 35…480 V AC 50…60 Hz between phases |
35…277 V AC 50…60 Hz between phase and neutral | |
277…999000 V AC 50…60 Hz with external VT | |
Frequency measurement range | 45…65 Hz |
Measurement accuracy | Current +/- 0.5 % |
Voltage +/- 0.5 % | |
Frequency +/- 0.05 % | |
Power factor +/- 0.01 | |
Reactive power +/- 2 % | |
Reactive energy +/- 2 % | |
Active power +/- 0.5 % | |
Apparent power +/- 0.5 % | |
Active energy +/- 0.5 % | |
Apparent energy +/- 0.5 % | |
Harmonic distorsion (I THD & U THD) +/- 5 % | |
Accuracy class | Class 2 reactive energy conforming to IEC 62053-23 |
Class 0.5 active energy conforming to IEC 62053-22 | |
Number of outputs | 1 relay |
Output voltage | 300 V AC@2 A |
Demand intervals | 1 s |
Local signalling | Green LED: activity |
Red LED: output signal 1…9999000 pulse/ k_h (kWh, kVAh, kVARh) | |
Red LED: alternate source | |
Communication port protocol | Modbus at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none – 2 wires, insulation 2500 V |
Communication port support | RS485 |
Data recording | Energy consumption logs |
Material | Polycarbonate |
Flame retardance | V-0 conforming to UL 94 |
mounting mode | Flush-mounted |
Mounting support | Framework |
Provided equipment | Installation guide |
Installation category | III |
Type of installation | Indoor installation |
Measurement category | Category III 480 V |
Electrical insulation class | Class II |
Connections – terminals | Current circuit: screw clamp terminals (bottom) 2.08…3.31 mm² cable(s) |
Voltage circuit: screw clamp terminals (top) 0.82��3.31 mm² cable(s) | |
Control circuit: screw clamp terminals (top) 0.82…3.31 mm² cable(s) | |
Communication: screw clamp terminals (bottom) 0.33…3.31 mm² cable(s) | |
Secondary circuit: screw clamp terminals (bottom) 0.33…3.31 mm² cable(s) | |
Relay output: screw clamp terminals (rear) 0.33…3.31 mm² cable(s) | |
Tightening torque | Current circuit: 0.9…1 N.m Philips No 2 screwdriver |
Voltage circuit: 0.9…1 N.m Philips No 2 screwdriver | |
Control circuit: 0.9…1 N.m Philips No 2 screwdriver | |
Communication: 0.5…0.6 N.m Philips no 1 screwdriver | |
Secondary circuit: 0.5…0.6 N.m Philips no 1 screwdriver | |
Relay output: 0.5…0.6 N.m Philips no 1 screwdriver | |
Wire stripping length | Current circuit: 3.68 mm |
Voltage circuit: 7 mm | |
Control circuit: 7 mm | |
Communication: 7 mm | |
7 mm | |
Standards | IEC 61010-1:ed. 3 |
UL 61010-1:ed. 3 | |
Product certifications | CE conforming to IEC 61010-1 |
CULus conforming to UL 61010-1 | |
CULus conforming to CSA C22.2 No 61010-1 | |
C-Tick | |
Width | 96 mm |
Depth | Outside : 13 mm |
Panel : 52 mm | |
Height | 96 mm |
Net weight | 300 g |
Environment | |
Electromagnetic compatibility | Electrostatic discharge conforming to IEC 61000-4-2 |
Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 | |
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 | |
Surge immunity test conforming to IEC 61000-4-5 | |
Conducted RF disturbances conforming to IEC 61000-4-6 | |
Magnetic field at power frequency conforming to IEC 61000-4-8 | |
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 | |
Emission tests conforming to FCC part 15 class A | |
Emission tests conforming to FCC part 15 Subpart C | |
Emission tests conforming to FCC part 15 Subpart E | |
Overvoltage category | III |
IP degree of protection | IP51 front: conforming to IEC 60529 |
IP30 body: conforming to IEC 60529 | |
Relative humidity | 5…95 % at 50 °C |
Pollution degree | 2 |
Ambient air temperature for operation | -10…60 °C |
Ambient air temperature for storage | -20…70 °C |
Operating altitude | <= 2000 m |
Service life | 7 year(s) |
Packing Units | |
Unit Type of Package 1 | PCE |
Number of Units in Package 1 | 1 |
Package 1 Height | 5.04 cm |
Package 1 Width | 9.6 cm |
Package 1 Length | 9.6 cm |
Package 1 Weight | 285 g |
Unit Type of Package 2 | S03 |
Number of Units in Package 2 | 18 |
Package 2 Height | 30 cm |
Package 2 Width | 30 cm |
Package 2 Length | 40 cm |
Package 2 Weight | 5130 g |
Unit Type of Package 3 | P06 |
Number of Units in Package 3 | 144 |
Package 3 Height | 105 cm |
Package 3 Width | 60 cm |
Package 3 Length | 80 cm |
Package 3 Weight | 41.1 kg |
Sale!
EASYLOGIC PM1130H DUAL P&E RLY RS CL 0.5, Dual Source Energy Meters -Schneider Electric
Original price was: ৳ 20,000.00.৳ 16,000.00Current price is: ৳ 16,000.00.
& Delivery/Courier ChargeDocuments: Product datasheet, Instruction Sheet, CAD, Catalogue
Free Delivery on orders over ৳50,000!
- Cash on delivery
- 1-3 Days Standard Delivery Guaranteed
- No-Risk Money Back Guarantee!
- No Hassle Refunds
- Secure Payments
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.