The MS116-0.63 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 0.63 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.
| MAIN SPECIFICATION | |
| ABB Global ID | ABB1SAM250000R1004 |
| Business Area (Master Data) Name | Electrification |
| Catalog Description | MS116-0.63 Manual Motor Starter Trip class 10A, 0.4 … 0.63A |
| Division (Master Data) Name | Smart Power |
| EAN | 4013614320279 |
| Rated Insulation Voltage (Ui) | 690 volt |
| Rated Operation Current | 0.63 ampere |
| SKU ID | 1SAM250000R1004 |
| TECHNICAL | |
| Connecting Capacity Main Circuit | Flexible with Ferrule 1/2x 0.75 … 2.5 mm² |
| Flexible with Insulated Ferrule 1/2x 0.75 … 2.5 mm² | |
| Flexible 1/2x 0.75 … 2.5 mm² | |
| Rigid 1/2x 1 … 4 mm² | |
| Contact Position Indication | ON / OFF |
| Conventional Free-air Thermal Current (Ith) | Main Circuit 0.63 A |
| Electrical Durability | 100000 cycle |
| Mechanical Durability | 100000 cycle |
| Minimum Mounting Distance | Electrical Conductive Board, Horizontal – Up to 400 V 0 mm |
| Electrical Conductive Board, Horizontal – Up to 690 V 1.5 mm | |
| Electrical Conductive Board, Vertical 75 mm | |
| Other Device Same Type, Horizontal 0 mm | |
| Other Device Same Type, Vertical 150 mm | |
| Mounting On DIN Rail | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715 |
| TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715 | |
| Mounting Position | Position 1 to 6 |
| Pollution Degree | 3 |
| Power Loss | at Rated Operating Conditions per Pole 0.7 W |
| Rated Frequency (f) | Main Circuit 50 Hz |
| Main Circuit 60 Hz | |
| Rated Instantaneous Short-Circuit Current Setting (Ii) | 7.9 A |
| Rated Operational Current (Ie) | 0.63 A |
| Rated Operational Current AC-3e (Ie) | 0.63 A |
| Rated Operational Power AC-3e (Pe) | (400 V) Three Phase 0.18 kW |
| Recommended Screw Driver | Pozidriv 2 |
| Standards | IEC/EN 60947-1 |
| IEC/EN 60947-2 | |
| IEC/EN 60947-4-1 | |
| UL 60947-1 | |
| UL 60947-4-1 | |
| Terminal Type | Screw Terminals |
| Tightening Torque | Main Circuit 0.8 … 1.2 N·m |
| Wire Stripping Length | Main Circuit 9 mm |
| TECHNICAL UL/CSA | |
| Ampere Rating UL/CSA | 0.63 A |
| Connecting Capacity Main Circuit UL/CSA | Flexible 1/2x 16-12 AWG |
| Stranded 1/2x 16-12 AWG | |
| Full Load Amps Motor Use | (110 … 120 V AC) Three Phase 0.63 A |
| (200 V AC) Three Phase 0.63 A | |
| (208 V AC) Three Phase 0.63 A | |
| (220 … 240 V AC) Three Phase 0.63 A | |
| (440 … 480 V AC) Three Phase 0.63 A | |
| (550 … 600 V AC) Three Phase 0.63 A | |
| General Use Rating UL/CSA | (600 V AC) 0.63 A |
| Locked Rotor Amps | (110 … 120 V AC) Three Phase 3.78 A |
| (200 V AC) Three Phase 3.78 A | |
| (208 V AC) Three Phase 3.78 A | |
| (220 … 240 V AC) Three Phase 3.78 A | |
| (440 … 480 V AC) Three Phase 3.78 A | |
| (550 … 600 V AC) Three Phase 3.78 A | |
| Maximum Operating Voltage UL/CSA | Main Circuit 600 V AC |
| Short-Circuit Current Rating (SCCR) | Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 30 kA |
| Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 5 kA | |
| Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 30 kA | |
| Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 5 kA | |
| Tightening Torque UL/CSA | Main Circuit 10 in·lb |
| ORDERING | |
| Minimum Order Quantity | 1 piece |
| ENVIRONMENTAL | |
| Ambient Air Temperature Compensation | Yes |
| Maximum Operating Altitude Permissible | 2000 m |
| Resistance To Shock Acc. To IEC 60068-2-27 | 11 ms Pulse 25g |
| Resistance To Vibrations Acc. To IEC 60068-2-6 | 5g / 3 … 150 Hz |
| RoHS Status | Following EU Directive 2011/65/EU |
| CLASSIFICATIONS | |
| E-Number (Finland) | 3706004 |
| E-Number (Sweden) | 3111936 |
| EClass | V11.0 : 27370401 |
| ETIM 4 | EC000074 – Motor protective circuit-breaker |
| ETIM 5 | EC000074 – Motor protective circuit-breaker |
| ETIM 6 | EC000074 – Motor protection circuit-breaker |
| ETIM 7 | EC000074 – Motor protection circuit-breaker |
| IDEA Granular Category Code (IGCC) | 4845 >> 3 Pole Motor Circuit Protector Circuit Breakers |
| Object Classification Code | F |
| UNSPSC | 39121521 |
| OTHER | |
| Actuator Type | Rotary Handle |
| Ambient Air Temperature | Around the Enclosure 0 … +40 °C |
| Operation -25 … +70 °C | |
| Operation Compensated -25 … +55 °C | |
| Storage -50 … +80 °C | |
| Degree Of Protection | Housing IP20 |
| Main Circuit Terminals IP10 | |
| Number Of Poles | 3 |
| Product Net Width | 45 |
| Rated Impulse Withstand Voltage (Uimp) | Main Circuit 6 kilovolt |
| Rated Operational Current AC-3 (Ie) | 0.63 A |
| Rated Operational Power AC-3 (Pe) | (400 V) Three Phase 0.18 kW |
| Rated Operational Voltage | Main Circuit 690 V AC |
| Rated Service Short-Circuit Breaking Capacity (Ics) | (230 V AC) 50 kA |
| (400 V AC) 50 kA | |
| (440 V AC) 50 kA | |
| (500 V AC) 30 kA | |
| (690 V AC) 30 kA | |
| Rated Ultimate Short-Circuit Breaking Capacity (Icu) | (230 V AC) 100 kA |
| (400 V AC) 100 kA | |
| (440 V AC) 100 kA | |
| (500 V AC) 100 kA | |
| (690 V AC) 100 kA | |
| Setting Range | 0.40 … 0.63 A |
Reviews
There are no reviews yet.