C.BREAKER SACE EMAX2 E4.2H 4000 FIXED THREE-POLE WITH TERMINALS REAR HORIZONTAL AND SOLID-STATE RELEASE IN AC EKIP/DIP-LI R 4000 FITTED WITH: 4 AUXILIARY CONTACT AND C.BREAKER IN POSITION OPEN-CLOSED
Technical Information | |
Item condition | New |
Manufacture name | E4.2H 4000 Ekip Dip LSI 3p F HR |
Brand | ABB |
Categories | Breakers |
Harmonized System Code | 8536 2090 00 |
Number of auxiliary contacts as normally open contact | 0 |
Number of auxiliary contacts as normally closed contact | 0 |
Rated permanent current Iu | 4000 A |
With integrated under voltage release | No |
Number of poles | 3 |
Overload release current setting | 1600-4000 A |
Number of auxiliary contacts as change-over contact | 4 |
Rated voltage | 690 V |
Degree of protection (IP) | IP30 |
Position of connection for main current circuit | Back side |
Motor drive integrated | No |
Type of electrical connection of main circuit | Bolt connection |
Type of control element | Push button |
With switched-off indicator | Yes |
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz | 100 kA |
Adjustment range short-term delayed short-circuit release | 2400-40000 A |
Adjustment range undelayed short-circuit release | 6000-60000 A |
Suitable for DIN rail (top hat rail) mounting | No |
Integrated earth fault protection | No |
Motor drive optional | Yes |
Device construction | Built-in device fixed built-in technique |
DIN rail (top hat rail) mounting optional | No |
Complete device with protection unit | Yes |
Reviews
There are no reviews yet.